advertising adhesives

The most common connections in advertising companies. Plexiglass letters - choose ATK UV10 or ATK UV16, or PMMA 4/16 (these are solvent-based adhesives, additional safety considerations are needed). Use ATK 021 for the first use, ATK 812 for the second, previously glued with pieces of acrylic tape for initial holding and spacing. Be sure to lightly wipe the surfaces to remove smooth surface and debris. 3D tape letters - raw aluminum or a plastic insert. Most often we make a small groin with SA 10-15 WHT or CC 10-12 PHVCLR. If we have a plastic insert, ATK FIX 01 or PMMA16 is enough. Aluminum coffers or dibond composite board - the bends are welded in the fillet SA 10-15 BLK, and the reinforcements to the sheet then using GB 10-10, so that there are no pull-ups. The holes with the letters are glued with ATK 812+ P200 undercoat. Display cases, display cases, pylons, outdoor furniture - due to the large amount of materials we choose for a specific application. Call us or write an e-mail - we will choose the right one. Doming doming stickers - proven PU resin 45CLR hard-elastic or stiff 41CLR for pouring prints and ornaments-glitters. PMMA pendants with magnets - super fast and proven ATK UV 16 with AP1 etch on metal. Other signs and signs - you can use acrylic tape or ATK PU CLEAR. Stands and other exhibition elements made of foamed PVC and PS - use ATK FIX 06 or SA 10-15 WHT when you want to have a perfectly white color. In advertising companies printing, it also means banners - tabs can be made by welding with a large amount, and for smaller ones, use the dedicated B170 glue. As a last resort, a special tape, but we do not recommend it. Most common mistakes? If you remove the foil protecting the plate, it should always be degreased. By gluing dibond, you connect powder coated surfaces, not aluminum or plastic inside. The surface of the plexiglass after milling is not colorless - do not physically polish it or melt it with a burner if you connect this edge, because the glue will get glazed and, in addition, it will bind better.