ATK PU42 transparent polyurethane resin

Transparent polyurethane resin with a hardness of 84D. A resin with a wide range of applications, stable over time and non-yellowing thanks to the HDI hardener. For what: castings of e.g. figures, industrial and decorative elements pouring openings and gaps filling coating - surface protection gluing Properties: non-yellowing stability of HDI-based products (polyol+ HDI) very good adhesion to various substrates liquid consistency only 200 cps. easy removal of air bubbles 7 min. working time and full after 24H. temperature resistance -30+90 degrees for castings recommended thickness 1-5 mm for bonding even 0.2 mm thick high resistance to industrial chemicals, e.g. oils, gasoline, solvents does not react with the material and is neutral for most surfaces without damaging e.g. painted surfaces When bonding, it binds to most materials such as: wood, metal, plastics, concrete, brick, etc., composites, painted surfaces, glass, stone, ceramics. In case of insufficient adhesion to the substrate, use the ATK 822 primer, 823 or P200. depending on the material Packaging: 50 and 400 ml cartridges. for easy and quick application. 1, 5 and 20l. - for mixing by hand or through the dispenser.