Adhesive for GB BLK dibond boxes

Proven glue for gluing dibond and aluminum coffers. How to use: after milling and assembling the cassette, apply the glue completely in the corners so that the slant is min. 5-8 mm. after folding the cassette, every 5-10 cm, paste the aluminum angle. Specifications: black DOES NOT ADD THE DIBOND! gap: 0.5-15 mm expansion up to 400% (we can glue two different materials such as aluminum and carbon without damaging during temperature changes) resistance to weather conditions, acids, salts, alkalis and full UV resistance excellent resistance to vibrations, impacts , vibrations which, with appropriate thicknesses, partially reduce the working time 10 min initial strength after 1h (60%), full after 6h does not flow from vertical and ceiling surfaces joining most surfaces without preparing the substrate only with degreasing temperature resistance from -40 to 120 ° C short-time to 200 ° C The complete set for gluing dibond includes (depending on the choice) Acralock glue GB 10-05, 50 ml or 10-10 BLK - 490 ml Plastic degreaser 100 ml Mixers / Adhesive mixer - 4 pieces cartridge squeezer 50ml or 490 ml. 10: 1 Need less glue included? - click here Gluing dibond composite panels can be divided into: - gluing dibond cassette structures after milling and bending the walls - then we use SA 10-15 BLK - we glue the groin, - gluing plexiglass from the inside to the milled plate for letters and illuminated coffers - we use GB 10-10 or ATK 812 - sticking angles and other cassette profiles, signs, pylons GB 10-10 or SA 10-15 - sticking plexiglass on the edge in 3D letters - we use a thin glue groove SA 10-15 WHT or a transparent version of CC 10 -12 PHVCLR