plexiglass & polycarbonate adhesives

Due to the "smoothness" of the surface, bonding all transparent materials is not easy and we will not stick such materials with ordinary plastic adhesives, especially if we want to maintain the aesthetics of the joint. However, there are tested products for such applications and the most common ones are described below. Gluing will be the same in the case of: - PMMA - PC - PET - PVC - SAN-PS-HIPS - ABS - generally translucent When gluing advertising elements of letters, stands, display cases or boxes, go to the category adhesives for advertising, there you will find more details come below you will find some of the same versions. The easiest explanation for the selection of glue will be the division into: Two separate plexiglass surfaces, etc. - i.e. gluing a crack or edge - ATK UV 16 or ATK UV10 - always transparent, CC 10-12 - on surfaces other than plexiglass (it can react and do slightly milky which does not affect the adhesive strength) or if the color can be any Acralock SA1-15 or 10-15 glue. Additionally, we can fill the gaps with them. In case of large damage, it can be strengthened by sticking a piece of plastic on the reinforcement completely or from time to time. These include gluing, for example, broken camping windows, machine and robotic covers, stands, displays, skylights, etc. Bonding polycarbonate, etc. with other materials - here you should take into account the large expansion of these surfaces under the influence of temperatures, even 1 cm per each meter, therefore we use adhesives with high elongation or flexible, i.e. ATK 812, GB 10-10 or PU clear. These are connections with metals, e.g. angles or other supports, or fasteners and hangers. The last particular application is bonding and sealing the cellular boards. As long as the crack is repaired as above, the connection with the H-profile spacer or the closure of the whole U-fitting with an aluminum or plastic pvc or pmma fitting - all these connections are made with ATK 812 with a special ATK 822 or P200 primer. Such a connection will ensure tightness and adequate expansion with temperature changes.