Clear methacrylate adhesive Acralock CC 10-12

Currently, the strongest transparent methacrylic adhesive for PMMA, PC, PVC, PET, PS and SAN Acralock CC 10-12 after gluing in tests, even bending / breaking the element, always breaks the plastic, never the glue. Used wherever it is necessary to obtain a transparent joint - in advertising companies, in the regeneration of glass, covers, plastic lamps, production of decorations, etc. When gluing two surfaces flat, transparency at the plexiglass level without refraction of light is obtained. The surface does not need to be matted before gluing, it is only recommended to use a degreaser for plastic or metal depending on the type of glued materials. Key features: open time 2 minutes color: transparent glues and fills gaps up to 4 mm (dense), rare version - 2 mm edges do not need to be sanded after sawing as gluing will smooth the surface not harmful during and after gluing, as solvent-based adhesives do not contain styrenes strength 60% after 1 h (full after 6 h) does not turn yellow with time and is resistant to UV light resistant from -40 to 100 ° C continuous operation, short-term even 160 ° C fully resistant to weather conditions, salts, no concentrated acids and bases, in the case of even edge gluing, the material always breaks due to the fact that the glue itself is 2-3 times stronger than the surface element being joined, no need to brush, roughen etc. it is enough to wipe with a degreaser Application: advertising companies - gluing plexiglass and PC flat, edge etc. in display cases, 3D letters, etc. automotive - repair and regeneration of camping windows, fairings, headlights and lamps decoration - production of ornaments, trophies, etc. Glued t plastics: PMMA - plexiglass (transparent, milky and colored) PC - polycarbonates (there may be a slight clouding of the adhesive, which does not affect the strength, but only the visual effect) PET, PET-G PVC hard PS ABS (all hard styrene plastics) composites - on epoxy and polyesters; vinylesters, laminates, etc. etc. dibond metals and other plastics besides PP and PE. Acralock CC 10-12 includes versions: CC 10-12 PCLR (thin), 50 ml and 490 ml cartridges (available on request) CC 10-12 PHVCLR (thick), 50 ml and 490 ml cartridges Note: 10: 1 glue in the cartridge - you need a squeezer for two-component adhesives (the adhesive cannot be mixed by hand). The set with the adhesive includes one stirrer (mixer). We recommend using 2-3 stirrers per one pack of glue. Our advice, in words, in writing and through experience, is the best of our knowledge, but only non-binding guidelines are relevant, also with regard to any third party property rights, and does not exempt you from your own trials of the products we supply with regard to their suitability for certain technology and goals. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery. If you are a manufacturer and need larger amounts of glue - we will perform free tests. Make an appointment with our technologist!