Adhesive for 3D spatial letters 10-15 WHT

Adhesive for 3D spatial letters Acralock 10-15 WHT Adhesive used and proven by hundreds of advertising companies using previously products of other companies. Provides a very good hold and thanks to the snow-white color of the glue, the reflection makes the entire face of the letter light up (masking the glue joint), which is practically invisible. After bending the tape and inserting the cut face of the letter from plexiglass, we apply the groin glue - a thin groin that will not be visible. Adhesives: raw aluminum tapes painted aluminum tapes raw and painted steel tapes Advantages of glue, or why is it worth it? styrene-free gap filling up to 15 mm (min.0.5 mm) initial strength 1 h (60%), full 6 h resistant to UV light, therefore, it does not turn yellow with time durability. temperature from -40 to 120 ° C short-term up to 200 ° C working time 15 min. joining raw and coated metals without the use of primers, primers, etc. full resistance to weather conditions, salts, bases (pH 3-10) and non-concentrated acids resistant to vibrations, impacts and vibrations which partially reduces elongation depending on the thickness of the adhesive up to 140% - a hard-elastic connection, therefore you can glue metal with plastic on large and small surfaces without damaging both materials when temperature changes. Complete kit for gluing 3D letters: Acralock 10-15 WHT - white - 490 ml, Plastic degreaser 100 ml, Mixers for mixing - 3 pieces squeezer for 490 ml cartridges. 10: 1 Our advice in word, writing and experience is the best of our knowledge, but only non-binding guidelines are relevant, also with regard to any third party property rights, and does not exempt you from your own attempts at the products we supply with regard to their suitability for specific technologies and purposes. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery.