Liquid plastic for PU5 / PU9 / PU45 / PU021 casting

Plastic for casting in cartridges for easy dosing. Advantages: polyurethane base - even the rigid version is as hard as epoxy resin castings, after casting, we PAINT very easily because it does not contain silicones resistant to light and weather conditions resistance to various chemicals ease of pasting e.g. to a stand, hangers etc. Recommendations for pouring: dosing from original cartridges or by means of a dosing system in the case of manual mixing, degass / remove air from the mixture casting mold should be made of silicone or non-stick materials such as polyethylene, POM or PTFE, in the case of twisted or folded forms, e.g. metal, it is mandatory to cover with a separator full binding takes place after 24 hours. There are several types of glue to choose from: Technical data: version: ATK PU5 stiffness: 85A color: black time for mixing and pouring: 15 min time for demoulding: 45 min Technical data: version: ATK PU9 stiffness: 45D color: black time for mixing and pouring flooding: 5 min demoulding time: 15 min Technical data: version: ATK 021 stiffness: 80D color: cream mixing and pouring time: 10-12 min demolding time: 90 min Technical data: version: ATK PU45 CLR stiffness: 72D color: transparent time for mixing and pouring: 20 minutes time for demoulding: 5h ADDITIONAL INFORMATION: With each glue you get 1 mixer for FREE. You will find the necessary PU5, PU9 and PU45 adhesive squeezers here You will find the necessary 400 ml PU021 adhesive squeezers here Our advice in words, writing and experience is based on our best knowledge, but is only valid for non-binding guidelines, also with regard to any protective rights third parties and do not release you from your own trials of the products we provide, in terms of their suitability for specific technologies and purposes. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery. If you are a manufacturer and need larger amounts of glue - we will perform free tests. Make an appointment with our technologist!