ATK PU5 sealing polyurethane adhesive

Polyurethane adhesive for bonding and pouring surfaces with high flexibility up to 90% and hardness of 85A. For bonding and pouring: metals, glass, ceramics, stones, cement, composites, wood. Resistance to: water, moisture. Available in standard 1: 1 cartridges 50 ml 400 ml (on request) Technical data: Open time: 15 min Color: black Initial setting: 45 minutes (full 12h) Viscosity: 8000 cPs (self-leveling) Elongation: 90% Tensile strength : 8 N / mm2 Resistivity (Ω • cm) - 1.2 x 1011 Dielectric constant er - 2.8 Insulation strength (kV / mm) - 21 Thermal conductivity (W / m • K) 0.20 Hardness: 85 A ATK PU version 9 - 40D and 140% expansion with increased strength up to 20N / mm2 in tensile strength. If you want to seal expansion joints, choose ATK 812 SL. ATK PU 5/9/16 SERIES - these are pure polyurethanes of the new generation MDI+ polyolio without ordinary isocyanates (they harden quickly on contact with air and a very small decrease in strength over time), therefore they are used in industry replacing the old generation PU. Our advice, in words, in writing and through experience, is the best of our knowledge, but only non-binding guidelines are relevant, also with regard to any third party property rights, and does not exempt you from your own trials of the products we supply with regard to their suitability for certain technology and goals. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery. If you are a manufacturer and need larger amounts of glue - we will perform free tests. Make an appointment with our technologist for a free visit!