Transparent ATK UV16 adhesive for magnets

Adhesive for magnets / plexiglass ATK UV 16 Glueing magnesium into milled holes for stands, statuettes, advertising pendants, frames for diplomas, etc. Fixing wherever aesthetics and fast connection are needed. The set includes everything you need: ATK UV 16 glue - 50 ml Primer P200 - 5 ml Isopropanol-based degreaser - 100 ml NOTE: A flashlight or a UV lamp is required to cure the adhesive. If you want to stick the magnet to the glass, use ATK UV 20 Application: sticking magnets, fasteners, hinges, etc. in: plexiglass polycarbonate pvc pet and pet-g ps san abs Instructions for use: degrease the surface of the magnets, grease. Wipe with AP1 etchant and leave for 15 minutes. apply the glue either on the magnet or into the milled material, harden the glue. Remember: the milled holes do not need to be sanded until smooth, the glue will fill the whole and make the surface perfectly transparent without matte edges, the holes do not have to be much larger than the magnet, 0.1 mm is enough. Specifications: Color / color: Transparent Density: thin 110 cPs Gap: 0.01-0.2 mm Possibility of outflow / flooding: Yes - stays listening Curing: UVA light range Packaging: 50 ml Technical data sheet available in the attachment.