Flexible rubber adhesive ATK PU9

Highly flexible adhesive for bonding rubbers with metals and plastics. If you need to stick rubber on small or longitudinal surfaces, additionally the elements do not touch, even a few millimeters, use this version; however, if you have large pieces and gluing over the entire surface, use highly flexible U-800. Application: if heavily soiled or oily, degrease or pre-wash the rubber roughen the rubber with 80-120 sandpaper degrease again apply glue yes. so that, after pressing, the width of the glue should not exceed 2 cm (if you are gluing 1 m2, apply the glue in a line, 3-5 cm apart), press it and leave it to bind. What can we glue? rubber with metals such as steel, aluminum etc. rubber for wood rubber for plastic rubber for glass, ceramics, porcelain and stone Remember to sand / rub the rubber surfaces with sandpaper. Use the adhesive with EPDM rubber. (standard rubber) Included: Flexible adhesive for gluing and sealing ATK PU9 rubber - 50g - black color Degreaser spray - 100 ml Primer for ATK 10 - 5 ml rubbers Squeezer for glue in the 1: 1 system 3 adhesive agitators Remember: The cartridge fits for standard rigid tube squeezers. The surface should always be degreased and roughened. In the case of gluing smooth surfaces such as: dibond, plexiglass, etc., the P200 primer should be used. If you will glue modified rubbers TPO, TPE, TEO, use ATK 822 primer or ATK FIX glue.