Adhesive for silicone and silicone rubber ATK FIX 06

Glue for rubbers, including silicone rubbers ATK FIX 06 Rubber with silicone additives - often - it is smoother and glows slightly. If you want flexible glue, choose ATK 663 We glue: rubber gaskets with silicone additives, silicone o-rings, silicone rubbers, silicone modified rubbers TPO, TPE, TEO, PU, PUR, standard rubbers such as EPDM, SBS, SBR, NBR, SR with each other and for metal substrates, made of plastic, glass, etc. We apply it to small areas, up to several square centimeters. How to glue: clean the material with a degreaser from the kit, cut the element that will stick together (it must be evenly cut), apply the silicone side with a rubber primer and wait 1-2 minutes. (it is worth lubricating twice with an interval of 20-30 seconds.) apply a small amount of glue and press it so that the glue spreads on the surface, hold for 5-15 seconds. (you can put everything under the press if it is possible) Remember: after pressing the material, you cannot move the glued elements anymore because it is a contact adhesive, the surface must be even; if you have cavities, glue together the largest elements first and then paste pieces of the same material as an "insert" if you have a cavity, paste a piece of the same rubber, cutting evenly beforehand The whole set is: ATK FIX 06 cyanoacrylate rubber adhesive - 50 ml Plastic degreaser 100 ml ATK FIX PRIMER for Silicone Gum - 5 ml