Liquid rubber - liquid polyurethane ATK PU9

Polyurethane casting rubber for casting and gluing rubber surfaces with each other and other materials Operating instructions: prepare the mold for which you want to cast (it should be silicone, if it is made of a different material, smear the surface with a separator / wax so that it does not stick, place the elements to be flooded Pour the casting and wait for setting (depending on the version, it will be several or several minutes). In case of pouring the element, recreating the loss, roughen with sandpaper and degrease the surface. : water moisture engine oils xylene acetone gasoline not resistant to ethylacetate and methyl ethyl ketone all of the above also at an elevated temperature of 60 degrees We use for: castings, repairs of pressure rollers, regeneration of wheels, pouring and sealing, polyurethane coating of metal and wooden elements, etc. Available sets: cartridge 50 ml+ squeezer 1: 1 small+ degreaser 100 ml+ 3 stirrers+ ATK primer 10 - 5 ml cartridge 400 ml+ squeezer 1: 1 large+ degreaser 100 ml+ 3 stirrers+ ATK primer 10 - 200 ml (liter, 5 liters, 20 liters - on request) Includes everything you need to work. Due to the very good adhesion to the surface, the element can be immediately cast on the correct surface without the need for subsequent gluing. 1. ATK PU adhesive 9 - 50 ml 2. Degreaser for plastics 100 ml 3. Mixers / glue mixer - 3 pcs. 4. Squeezer for 50 ml cartridges. 1: 1 5. ATK rubber primer 10 - 5 ml Technical data: Packaging: 50 ml Open time: 5 minutes Elongation: 140% Setting time: 15 min Full hardening: 24 h Density: 15,000 mPas Hardness: 45D Color: Black SERIES ATK PU 5/9/16 - these are pure polyurethanes of the new generation MDI+ polyolio without ordinary isocyanates (they harden quickly on contact with air and a very small decrease in strength with time), therefore they are used in industry replacing the old generation PU. If you want flexibility: PU 1 - 40A, PU 2 - 60A. PU 5 Our advice, in words, in writing and through experience, is the best of our knowledge, but only non-binding guidelines are relevant, also with regard to any third-party property rights, and does not exempt you from your own trials of the products we supply with regard to their suitability. for specific technologies and purposes. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery. If you are a manufacturer and need larger amounts of glue - we will perform free tests. Make an appointment with our technologist for a free visit!