KEMISKOL V032 screw adhesive

Anaerobic screw glue, which is mainly used for screwing in screws, nuts and other threaded connections. KEMISKOL V032 glue can be easily unscrewed later, but the screws will not unscrew themselves. Mainly recommended for screws up to size M14. Application: - securing the screws against self-loosening - preventing corrosion on the thread from seizing - making later unscrewing easier Technical data: Shear strength (N / mm²): 3 ≤ 4 Breakaway torque (Nm): 4 ≤ 5 Viscosity (cPS) : 650 ≤ 700 Maximum gap (mm): 0.15 Temperature range (° C): -60 ≤+120 Fastening class: 1 Packaging: 10 g or 50 g Fastening classes in anaerobic adhesives: 1 - thread sealing and fastening with subsequent easy unscrewing (allows to seal and / or fastenings against self-unscrewing of nuts, bolts and pipes due to vibrations and impacts 2 - same as point 1, but to unscrew already use a wrench and the thread is quite resistant, 3 - As in point : 1 and 2, however, the fastening is so strong that in many cases it is impossible to unscrew, the screw may be damaged and / or it is necessary to heat the thread surface to "burn" the glue. We also use this class for gluing bearings, belt and toothed surfaces and sleeve. If you have: - a bolt or a nut that you tighten before unscrewing and sealing, choose V032 or T333 - bolt / nut gluing "permanently" V653 / T674 - bearings and bushings - small gap V640, larger slack V653 - pipe threads T138 or permanently T674 - In the case of a larger gap than the maximum used or acceleration of bonding with copper, brass, bronze and stainless steel, we use ACTIVATOR 11 for one surface 0.1 mm by two to 0.15 mm. Our advice, in words, in writing and through experience, is the best of our knowledge, but only non-binding guidelines are relevant, also with regard to any third party property rights, and does not exempt you from your own trials of the products we supply with regard to their suitability for certain technology and goals. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery. KEMISPLUS - Manufacturer of adhesives for industry for over 30 years. He has developed and continues to improve his 3 main brands KemisKOL, (anaerobic adhesives) KemisKIT, and KemisPOX, (epoxy adhesives). All production is carried out in Slovenia.