Description
Dictionaries
Comments
KEMISKOL T138 pipe and screw thread sealant. Key functions: Waterproofing against water, gas, fuel and other media. Application: sealing of pipe threads sealing of bolts and nuts Technical data: Shear strength (N / mm²): 2 ≤ 5 Breaking torque (Nm): 2 ≤ 5 Viscosity (cPS): thixotropic paste Maximum gap (mm): 0.25 Range temperatures (° C): -60 ≤+180 Fastening class: 1 Packaging: 50 g (200 g on request) Fastening classes in anaerobic adhesives: 1 - thread sealing and fastening with subsequent easy unscrewing (allows to seal and / or fastenings against - loosening of nuts, bolts and pipes due to vibrations and impacts 2 - the same as point 1, but to unscrew, we already use a wrench and the thread is quite resistant, 3 - As points 1 and 2, but the fixing is so strong, that in many cases it is impossible to unscrew, the bolt may be damaged and / or it is necessary to heat the thread surface to "burn" the glue. We also use this class for gluing bearings, belt, toothed and sleeve surfaces. If you have: - a bolt or a nut, we turn off before for unscrewing and sealing, choose V032 or T333 - bolt / nut gluing "permanently" V653 / T674 - bearings and sleeves - small gap V640, larger slack V653 - pipe threads T138 or permanent T674 - In case of a larger gap than the maximum used or acceleration for copper, brass, bronze and stainless steel, we use ACTIVATOR 11 for one surface 0.1 mm by two to 0.15 mm.
Comments