KEMISKOL T674 hydraulic adhesive 50g

Adhesive for hydraulic threads for fixing and sealing pipe connections - inch with the highest working temperature up to 250 degrees. We use it wherever the surfaces do not fit well, from 0.1 mm to 0.3 mm or with an activator 11 to 0.4 mm. Applications: sealing inch threads, seating of bearings with large gaps, gluing of sleeves and other belt joints with gaps up to 0.3 mm. (but not less than 0.1 due to the dense form) screwing broken threads Technical data: Shear strength (N / mm²): 30 ≤ 35 Breakaway torque (Nm): 40 ≤ 50 Viscosity (cPS): 3000 ≤ 3500 Maximum gap (mm): 0.30 Temperature range (° C): -60 ≤+250 Fixing class: 3 Packaging: 50 g (200 g on request) Fixing classes in anaerobic adhesives: 1 - thread sealing and fastening with subsequent easy unscrewing (allows to seal and / or fastenings against self-loosening of nuts, bolts and pipes due to vibrations and impacts 2 - same as point 1, but to unscrew already use a wrench and the thread is quite resistant, 3 - As point: 1 and 2 however, the fastening is so strong that in many cases it is impossible to unscrew, the bolt may be damaged and / or it is necessary to heat the thread surface to "burn" the glue. We also use this class for gluing bearings, belt, toothed and sleeve surfaces If you have: - a bolt or a nut to be screwed on before unscrewing and sealing, choose V032 or T333 - bolt / nut sticking "permanently" V653 / T674 - bearings and sleeves - small gap V640, larger slack V653 - pipe threads T138 or permanently T674 - In case of larger gap than the maximum used or acceleration bonding with copper, brass, bronze and stainless steel, we use ACTIVATOR 11 for one surface 0.1 mm by two to 0.15 mm. Our advice, in words, in writing and through experience, is the best of our knowledge, but only non-binding guidelines are relevant, also with regard to any third party property rights, and does not exempt you from your own trials of the products we supply with regard to their suitability for certain technology and goals. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery. KEMISPLUS - Manufacturer of adhesives for industry for over 30 years. He has developed and continues to improve his 3 main brands KemisKOL, (anaerobic adhesives) KemisKIT, and KemisPOX, (epoxy adhesives). All production is carried out in Slovenia.