Glue, rubber, metal, wood, U-800 200ml

Easy-to-apply glue for rubber elements with metals and other surfaces. U-800 glue can be applied with an ordinary brush without the use of specialized spray guns. The product provides the highest holding forces and very high temperature resistance up to 180 degrees. What to use for: standard rubber stiff rubbers - (except for silicone rubbers then use ATK FIX with a primer) foamed rubbers, the so-called flexible foams, e.g. made of EPDM For materials such as: metal, wooden surfaces - raw wood, varnished wood, stained wood and MDF fibreboards and chipboards, raw and veneered plastics (in the case of PP, TPO, TPE, TEO plastics - spray the surfaces with ATK 822 primer). : 1. clean the surfaces with the degreaser from this kit, 2. apply the glue with a brush or spatula to two surfaces and wait a few minutes. for evaporation 3. press on the entire surface, you can use a 90 mm silicone roller or a 100 mm metal roller 4. if the surface is springy and the elements are heavy, leave it under pressure for approx. 30 minutes. - 1 hour. The set includes: U-800 glue, packaging: 200 ml,+ 100 ml degreaser. (larger packages available here: 1, 5, 30 liters) Remember: after pressing the material, you cannot move the glued elements anymore because it is a contact adhesive, the surface must be even; if you have cavities, first glue the largest elements together and then paste pieces of the same material as an "insert" if you have a cavity, paste a piece of the same rubber, cutting evenly beforehand, we can also apply as a spray after pouring into the pressure tank and using the 1.6-1.8 nozzle