Adhesive for Acralock SA 1-15 magnets

Two-component adhesive Acralock 1-15 for neodymium and ferrite magnets with metals Application: magnets neodymium magnets ferrite magnets for: metals (steel, stainless steel, galvanized steel, acid-proof steel, aluminum) ABS, pet, pvc, pc, plexiglass, iatp (for pp and pe then use PP-1-02) composites of glass and carbon fibers - carbon wood, mdf, fibreboards etc. Do you want to glue the magnet to glass? Apply ATK UV 20 glue Application: degrease the surface on metal surfaces apply AP1 etchant and wait 15-20 minutes. apply glue and leave to dry initially 1 hour, full after 6 hours. The complete kit includes: 1. Acralock 1-15 NAT methacrylate adhesive 50 ml. 2. Mixers / Stirrer for proper adhesive mixing - 3 pieces. 3. Etching agent for the surface before gluing (primer) AP 1 - 5 ml 4. Degreaser based on isopropanol 100 ml 5. Dispenser for cartridge 1: 1 50 ml. Remember: - in the case of gluing to copper, brass and bronze, use EP61 with an AP1 etchant - if you are gluing to metal and you have a very strong magnet, use a slight distance or use EP61 - in the case of highly absorbable surfaces such as wood or fibreboard, you may need a primer - a primer P200 or 822 - Don't need a squeezer? Purchase Acralock 1-15 glue alone here. Technical data: natural color working time 15 min (manual strength after 1 hour) curing time: 60 min (initial) 24h (full) expansion up to 75% gap filling from 0.3 to 5 mm resistance to weather conditions, acids, salts, rules (from 3 to 10 ph) resistance to powder coating and galvanization full strength after 6 hours resistant to vibrations and impacts can be applied to vertical and ceiling surfaces - does not run off the surface temperature resistance from -55 to 120 ° C, short-term up to 250 ° C !!! More detailed information in the technical sheet. ------------------------------------------------ Our advice in word, in writing and through experience, they are the best of our knowledge, however, they are only valid for non-binding guidelines, also with regard to any third party property rights, and do not exempt you from your own trials of the products we provide with regard to their suitability for certain technologies and goals. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery.