Glue for copper, brass and bronze - copper color MED21

KEMISKIT MED21 - epoxy adhesive for copper, brass and bronze elements. After gluing, we can grind, thread and process the product like metal because it has as much as 66% metal content in the composition (the highest on the market). If we want to fill the element, we can heat the glue while mixing, where it becomes liquid and we can pour it into the hole or the mold - remember to pour in small portions to allow any air to escape. The initial form is a paste form, so you can fill cavities even in the overhead position and it will not run off the surface. There is no limit to the thickness of the mass itself. For optimal thickness, min. 1-2 mm. it is possible to sink a metal mesh, which will additionally strengthen the whole structure and will be like reinforcement Two-component adhesive which you will make: gluing copper pipes, gluing radiator pipes, perfectly suited as a sealant for copper pipes, gluing brass, gluing bronze, copper or brass tanks, We use for: gluing two separate surfaces, filling scratches and cavities, reproducing damaged or destroyed pieces sticking copper sheets to the reinforcement if the contact area is small Technical data: Packaging: 33 ml / 100g Working time: 30 min Form: Paste Mixing ratio: 10A: 1B Temperature range: -40 ≤+200 Color: brass-brown Additional information: If you want to glue two separate - matched surfaces, then we use ATK EP61 and in the case of cavities we only fill in Kemiskit MED21. Our advice, in words, in writing and through experience, is the best of our knowledge, but only non-binding guidelines are relevant, also with regard to any third party property rights, and does not exempt you from your own trials of the products we supply with regard to their suitability for certain technology and goals. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery. KEMISPLUS - Manufacturer of adhesives for industry for over 30 years. He has developed and continues to improve his 3 main brands KemisKOL, (anaerobic adhesives) KemisKIT, and KemisPOX, (epoxy adhesives). All production is carried out in Slovenia.