Acralock PP 1-02 polypropylene adhesive

Set with Acralock PP 1-02 glue for joining polyolefins Important: This is an adhesive typically used for bonding two surfaces, so if you have a thin 2-3mm crack. plastics, overlay a piece of another plastic or metal for reinforcement. Adhesives: PP (polypropylene) PE (PEHD, HDPE, hard) PELD (LDPE) POM TPO, TEO PTFE - (e.g. Teflon) Latest generation materials: PEI, PEEK, PES, PVDF, TCF, PCF, PBI, PAI, PPS -U, PS-U, PFA, ECTFE, metals composites other plastics such as PA, PET, ABS, PVC, PMMA, PU Included: Acralock PP glue 1-02 - 50ml 3 Adhesive mixers (MBQ 05-24L) Alcohol-based degreaser - 100 ml Economical squeezer 1: 1, 2: 1 cartridges Remember: In the case of temperatures above 18 C, in order to maintain the best properties - the glue is sent in a special refrigerated cartridge. The glue should be stored in the refrigerator and should not be more than 2 hours out of it. It is only shipped from Monday to Thursday. 1: 1 glue in a cartridge - a squeezer is needed (the glue cannot be mixed by hand). The set with the glue includes one stirrer (mixer). We recommend using 2-3 agitators per one pack of glue. Good to know: The subject of so-called plastics hard-to-glue ones are complex, but below is a list of what you should choose if you have elements made of these plastics. - general pp, pe, pom, ptfe bonding butt and overlapping or at cracks by bonding the PP 1-02 reinforcement, e.g. a cracked plastic barrel - bonding small ATK FIX elements with a primer - gluing pp, pe, pom and ptfe. - gluing polyethylene foams - U-800i 812 with ATK823 primer or warm ATK113. - bonding lamps and bumpers from pp, pp / epdm, pp+ .... pu16 with 822 primer - bonding and sealing surfaces pp ATK 812+ 822, pe ATK 812+ 823 (or see point 1) - all kinds of PE foil - insulation, geomembranes, roofing membranes use HYLKOL Our advice in word, writing and experience is based on our best knowledge, but only non-binding guidelines are relevant, also with regard to any third party protective rights and does not exempt you from your own attempts provided by us products, in terms of their suitability for specific technologies and purposes. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery.