Adhesive for polyurethane PUR PU16

Adhesive for polyurethanes PU, PUR, RIM, etc. Quick version 3.5 minutes to apply and fit the surface. It glues these materials with each other and with other materials and metals. We can glue two surfaces with it and fill it. The set includes an additional base in the case of gluing plastics that contain a layer of separators after production, and we do not want to sand the surface - which is always recommended. Initial joining is achieved after approx. 35 minutes. after which there is manual strength and we can grind and process any excess. Glued materials: pur-pu with each other and: metals other plastics composites building materials, such as brick, concrete, etc., glass, wood. a complete set) bonding industrial polyurethane to each other butt, overlapping or to metals, mainly aluminum and steel, in road elements such as posts, studs, etc. in the case of very flexible PU bonding, we use PU 9 or PU 5. in the road industry: posts, stands bumpers in warehouse machines: racks, forklifts, polyurethane belt bumpers The set includes everything you need: Polyurethane adhesive ATK PU16 BLK LV - 50 ml cartridge 1 Mixer / Adhesive mixer (05-16) Isopropanol-based degreaser - packaging 100 ml Manual squeezer for adhesives in cartridges - 1: 1 - 50 ml Operating instructions: when gluing two separate surfaces overlapping: - lift and degrease the surface - apply glue and press down - leave under light pressure for 30-40 minutes. if you have a cavity - mill the surface - apply glue to the cavity and press it with a spatula - leave it to dry - sand any excess with sandpaper, grinder, etc.