Adhesive for ABS, mirrors and fairings ATK FIX 06

Adhesive for ABS elements, especially automotive mirrors and fairings. This set includes a proven cyanoacrylate adhesive with a filler-enhancer for bonding the above materials. Gluing is always done with ATK FIX glue, then we sprinkle ATK FILL to strengthen the connection. When finished, everything can be sanded and painted. What we glue spoilers, motorcycle fairings, rearview mirrors, outer covers, hubcaps, dummy grilles, grilles, car body elements, protection elements, air grilles, ailerons, car grills, Materials: hard ABS plastics and derivatives such as AES, ASA, SAN, AS PC with pc / abs, pc / pbt, PMMA PS - HIPS -GPPS PBT PET PUR We glue ABS elements in: automotive, home appliances RTV, industrial machine elements Gluing ABS or PC cap mounting - that is thin 2-3 mm plastic: sand the surface after approx. 1-2 cm around the crack degrease by wiping with a cloth spray activator C on one side, apply glue on the other side and press for 2-3 seconds. sprinkle the powder around it and cover with glue and repeat several times so that the joint is 2-3 mm. thickness. spray with activator C finished - if you need you can sand it with sandpaper and spray with paint. In this way, you glue other materials, and after gluing you get a weld that is stronger than the new part. The ABS gluing kit contains: 1. ABS ATK fix # 06 adhesive (thin), - 50 ml 2. Alcohol-based degreaser - 100 ml 3. Activator C - 200 ml spray - adhesive hardening accelerator 4. ATK FILL 60 g - powder for filling cavities