ATK UV16 plexiglass adhesive rare

The strongest UV glue for plexiglass and derivatives ATK UV16 (formerly MEGAUV 16) rare ATK UV 16 - for gluing between surfaces by inserting the glue - sucks up by capillary action and hardening with a flashlight from the set - we use for transparent and translucent plexiglass, including milk. Another version is also available: dense ATK UV 10 - for inguinal gluing with tinted plexiglass, which does not transmit UVA light or very weakly - apply the groin and harden (click here) Glued materials: plexiglass (PMMA) pc - polycarbonate pvc pet and pet-g pur ps - hips san abs (transparent modified) the above materials with: - wood - composites - metals - glass (we recommend ATK UV17 versions). Currently, UV-cured adhesives are increasingly used due to the speed of bonding and aesthetics. The curing time, depending on the lamp, can be assumed to be 5-30s. where we already get 80-90% of the final strength. No other adhesives achieve their final strength so quickly, even cyano-acrylic. The convenience of using such adhesives, i.e. hardening only after exposure, allows for smooth positioning of the materials. A rare version that flows between the surfaces. Despite the fact that it is a sparse version, the flash remains dry after curing - it does not get sticky as in 95% UV glue. Why is it worth using adhesives from the ATK UV series? speed of work saving time reducing costs dismissing the workplace several dozen times faster than with solvent-based adhesives Remember: Of course, one of the surfaces must be transmissive to UV light (why not be transparent? - UV light will penetrate even through the opal plexiglass) slightly roughening (always degreasing) Milled plexiglass, i.e. white on the edges, you do not need to grind because the glue is glazed !!! Application: automotive: e.g. repair of broken PMMA camping windows. advertising: hardening the glue on elements made of plexiglass such as stands, display cases, etc. and glass statues, boxes, emblems, hangers industry: gluing and repairing broken glass in machine covers stucco / ornamentation: gluing decorative elements such as transparent plastic glasses, gluing letters from plexiglass - ATK UV # 16 light-curing adhesive - technical data Color / color: Transparent Density: thin 110 cPs Gap: 0.01-0.2 mm Possibility of outflow / pouring: yes Curing: light-UVA range Packaging: 50 ml Note: It is necessary the use of UV light in order to properly cure the adhesive. Also remember to use eye protection glasses. We recommend using our UV lamps as they have been tested with adhesives. Due to the fact that gluing plexiglass is a vast topic and a multitude of applications, below is a short list of what and where to use: - gluing plexiglass by inserting ATK UV16 between the surfaces; if there is no light or even stronger gluing, CC 10-12 PCLR (joints always 100% transparent - gluing plexiglass fine gaps, defects, vertical surfaces ATK UV10, or CC 10-12 PHVCLR - gluing pc, pvc, ps matched surfaces ATK UV16 (connection 100% transparent) or cc 10-12 PCLR (joint whitening may occur, strength remains) - gluing polycarbonate, pvc, ps uneven surface ATKUV10 (transparent 100%); or stronger but with the possibility of a slight whitening CC 10- 12 PHVCLR - all transparent plastics on large gluing elements, such as aluminum strips, brackets, angles, etc., we use GB 10-05 / 10-10 or ATK 812 for a flexible joint - especially for large planes with a change in material expansion) Our advice in word, to the best of our knowledge and experience, however, are only relevant for non-binding guidelines, also with regard to any protective rights of the parties third parties and do not release you from your own trials of the products we provide, in terms of their suitability for specific technologies and purposes. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery. If you are a manufacturer and need larger amounts of glue - we will perform free tests. Make an appointment with our technologist for a free visit!