FE21 abrasion resistant coating

Protective coating against abrasion FE21 The adhesive can be applied with a spatula, apply the desired thickness min. 1mm. The product is resistant up to 200 degrees due to the fact that due to friction it can be accompanied by increased temperatures. A coating that we use to regenerate worn surfaces or protect new ones to increase durability against abrasion, cavitation and further abrasion and corrosion. You get the entire set you need, so you don't have to buy anything else. NOTE: Ask the technician also about the special spacer balls that increase the hardness and increase the abrasion resistance. (BALLS to be bought SEPARATELY after prior contact) Most often used in: pump regeneration air ducts heat exchangers, repairs of silos, industrial tanks and chutes engine blades and rotors propellers other places that we want to protect against abrasion To the surface: metals plastics composites ceramics / glass wood Technical information: Weight ratio of the flat: 10A: 1B Volume ratio of the mixture: 3A: 1B Shear strength N / mm2: 22-24 Open time: 30 minutes Curing time at 20 ° C: 24h / 20 ° C 80 min / 80 ° C Continuous temperature resistance: - 40 ° C ≤+ 200 ° C Mixture viscosity (mPas): paste Appearance / color: steel KEMISKIT FE21 glue 1 kg included and additionally: Surface degreaser 100 ml+ pad, sticks and spatula for mixing.