Description
Dictionaries
Comments
Perfectly white methacrylic adhesive for plastics, metals and composites. Designed for places where we care about the aesthetics of the connection. The outflow can be shaped like a grout, and thanks to its easy application, it can be used in places that are even difficult to access because the glue from the cartridge is immediately mixed in the mixer. When gluing small surfaces, it is more convenient to use 50 ml cartridges, and for medium and large surfaces - 490 ml packages. Used in gluing in the automotive, advertising, yacht and window industries - wherever a durable and reliable connection is needed. He will choose this version when you have: - gluing painted or gelcoated composites in white - glues and seals immediately - no need for another silicone sealing operation - huge time savings - gluing painted and colored white plastics - most often ABS, PMMA, PVC - powder coated metals, most often aluminum and steel - the above materials with each other and with each other, e.g. white gelcoat composite and aluminum reinforcements. - window frames, canopies, eaves, etc. - e.g. reinforcement of sandwich panels in car and caravan constructions, reinforcement of window frames and gluing of thresholds / canopies. Other glued materials: raw metals and powder coated plastics (from ps and pvc to abs and pmma etc. to polyolefins PP 1-02) polyesters and vinyl esters aryls, gelcoats and epoxies laminates and composites Advantages: styrene free filling of gaps up to 15 mm (min. 0.5 mm) initial strength 1 h (60%), full 6 h resistant to UV light, therefore, it does not turn yellow with time durability. temperature from -40 to 120 ° C short-term up to 200 ° C working time 15 min. joining raw and coated metals without the use of primers, primers, etc. full resistance to weather conditions, salts, bases (pH 3-10) and non-concentrated acids resistant to vibrations, impacts and vibrations which partially reduces elongation depending on the thickness of the adhesive up to 140% - a hard-elastic connection, therefore it is possible to glue metal with plastic on large and small surfaces without damaging both materials during temperature changes. The SA 10 WHT series includes 2 versions in 50 and 490 ml cartridges. and 20l buckets and 200l barrels. -SA 10-15 (the most frequently used version) -SA 10-40 (on request) NOTE! Acralock SA 10-15 Adhesive is a 10: 1 adhesive. It is necessary to use a squeezer working in this mode. The set with the glue is one stirrer (mixer). We recommend using 2-3 agitators per one pack of glue. It is not possible to use glue without a squeezer and a mixer. Our advice, in words, in writing and through experience, is the best of our knowledge, but only non-binding guidelines are relevant, also with regard to any third party property rights, and does not exempt you from your own trials of the products we supply with regard to their suitability for certain technology and goals. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery. If you are a manufacturer and need larger amounts of glue - we will perform free tests. Make an appointment with our technologist!
Comments