AP2 etchant for plastics

AP-2 etchant - for plastic surfaces, especially for PA (polyamides). The etchant is applied after degreasing, eg with an isopropyl alcohol-based degreaser. We use it for surfaces where we are not sure about the quality of the substrate, which increases the strength and durability of the joint, especially over a long period of time. Apply, for example, a cleaner or a cloth to clean and dry surfaces and wait 15 minutes for full evaporation and reaction with the surface. What the use of AP2 gives: - increase in strength after bonding - increase in strength after cataplasm / aging tests - i.e. in a long period of time Especially recommended for surfaces: - polyamides PA 6 PA6.6, PA11, PA12 etc. - other plastics covered with separators during / after production Available packages: 5ml 200ml