Acralock SA 10-70 Marine Methacrylate Adhesive

Adhesive only on request. If you want to purchase, please contact us by phone. Acralock SA 10-70 BLK adhesive is dedicated for bonding laminates, composites, epoxies, polyesters and gelcoats. The extended setting time means that the adhesive can be applied to large surfaces. Expansion up to 200% makes it able to eliminate gaps up to 5 cm !!! and vibrations / impacts when gluing the reinforcements to the bottom. The glue is very light, so the joints are not heavy even in the case of thicker layers. It replaces lamination and epoxy adhesives in yacht building and is mainly used there. It combines very high strength, expansion and durability of the connection. Used in the industry: - yacht - boatbuilding - marine - composites (gluing and strengthening large elements) Properties and features: black color expansion up to 200% gap filling from 0.5 to 50 mm resistance to weather conditions, acids, salts, alkalis (ph 3 to 10) no aging effect of the joint excellent resistance to vibrations, impacts, vibrations which, with appropriate thicknesses, partially reduces the working time 70 min initial strength after 1h (60%), full after 6h low weight of 1 cm3 is only 0.99 g. !!! (epoxy and polyester putties from 20-50% heavier) does not flow from vertical and ceiling surfaces joining most surfaces without preparation of the substrate or only with degreasing temperature resistance from -55 to 120 ° C, short-term up to 200 ° C SA 10 HV series includes 6 version in 490ml cartridges. and 20l buckets and 200l barrels. -SA 10-35 (on order) -SA 10-45 (on order) -SA 10-60 (on order) -SA 10-70 (most commonly used version) -SA 10-100 (on order) -SA 10-120 (ref.) Remember: Glue 1:10 in the cartridge - squeezer needed (the glue cannot be mixed by hand). The set with the glue is one stirrer (mixer). We recommend using 2-3 agitators per one pack of glue. Our advice, in words, in writing and through experience, is the best of our knowledge, but only non-binding guidelines are relevant, also with regard to any third party property rights, and does not exempt you from your own trials of the products we supply with regard to their suitability for certain technology and goals. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery.