Methacrylate adhesive SA 1-15 NAT

Acralock SA 1-15 NAT glue is a structural adhesive for plastics and metals. 1-15 NAT glue replaces welding, twisting or riveting - thanks to the resistance of the glue to elevated temperatures, the glued aluminum and steel elements can be powder coated. This version of the adhesive is also recommended for polyamides. You can glue both small and large elements here. The small amount of glue between the surfaces makes it very efficient. You can also make composite connections with other plastics and metals. The SA 1 series means two initial connection times for the NAT color - natural - beige SA 1-05 - 5 min. version SA 1-15 - 15 min. version Mainly used for: galvanized metals high-gloss stainless steel aluminum metals later powder coated DPCD - TELENE (one of the most effective adhesives in the world) polyamides - PA (PA6, PA 66, PA12, PA 11) glass and carbon fiber composites e.g. UP-GF (it is so strong that the carbon is torn in tests) Adhesive also: raw and coated metals (glues galvanized surfaces without any primers) plastics (also PA polyamides / nylon without primers) DPCD composites and laminates RIM - TELENE hard rubbers Technical data natural color working time 15 min (manual strength after 1 hour) curing time: 60 min (initial) 24h (full) expansion up to 75% gap filling from 0.3 to 5mm resistance to weather conditions, acids, salts, alkalis ( from 3 to 10 ph) resistance to powder coating and galvanization full strength after 6 hours resistant to vibrations and impacts can be applied to vertical and ceiling surfaces - does not flow from the surface temperature resistance up to from -55 to 120 ° C, short-term up to 250 ° C !!! Available packages: 50 ml 400 ml Remember: 1: 1 glue in the cartridge - squeezer needed (the glue cannot be mixed by hand). The set with the glue is one stirrer (mixer). We recommend using 2-3 agitators per one pack of glue. Our advice, in words, in writing and through experience, is the best of our knowledge, but only non-binding guidelines are relevant, also with regard to any third party property rights, and does not exempt you from your own trials of the products we supply with regard to their suitability for certain technology and goals. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery. If you are a manufacturer and need larger amounts of glue - we will perform free tests. Make an appointment with our technologist for a free visit!