Veneer adhesive U-800

Strong and fast U-800 veneer glue What should you pay attention to? If you have a furniture veneer made of plastic such as ABS or PVC - stiff and springy, or you need full water resistance, e.g. in a bathroom, use ATK 812. If you want to glue small surfaces, you can use ATK 113 or ATK FIX 01 cold glue. Contact adhesive U-800 is characterized by fast and strong bonding, also at elevated temperatures and, importantly, it does not come off over time like other similar adhesives. If you use similar products in your services or production, we encourage you to try and compare the strength and heat resistance with the old adhesive. What kind of gluing do we do? veneer with natural veneer veneer with wooden boards, MDF, chipboard, plywood, etc. Modified and varnished veneer Furniture veneers (also those with an adhesive layer but usually do not stick after 1-2 years). MDF veneers - veneers on paper and fiber backing, door veneers veneers for wood, fiberboard and chipboard kitchen worktops, furniture boards, plywood also for metals, plastics, stone, ceramics, concrete, bricks, etc. (a test should be carried out as it may be needed using ATK 822 primer) Instructions: 1. clean the glued surface (if it is clean, blow it with air only, if it is dirty, degrease or wipe it with sandpaper). difficult surfaces such as modified plastic, etc. use 822 primer and wait until it dries, 3.apply the glue evenly on two surfaces and wait until they dry, 4.press the glued surfaces and leave until fully hardened - you can leave under pressure or use a press - especially recommended when the surface was springy. What do you get after purchase? U-800 glue - 200 ml (larger packages available on request - 1 liter, 5 liters, 30 liters) Degreaser for plastics 100 ml Remember: - If you want to glue the outer part of the veneer, it can be waxed - so you must always degrease or rub with sandpaper in to delete. - When the U-800 glue is too weak, the element springs and there are gaps, you can glue the uneven surface and fill it with ATK PU 021 glue.