ATK PU 021 wood putty

ATK PU 021 wood putty A product in the form of a thick paste that can be applied even in the ceiling position. Mainly for bonding and filling various materials and combinations of metals, plastics and stone. It provides very good mechanical properties along with chemical resistance - like epoxies. During mixing and after application, it is advisable to slightly heat the adhesive and surfaces to facilitate application - especially recommended when gluing two separate surfaces. It can be covered with thin layers, even below 1 mm and even a few centimeters thick. If you need to fill metal - steel, cast iron, take the FE21 version, if aluminum AL21. NOTE: If you are gluing 2 surfaces of wood, metal, etc. - use an easier to use and stronger ATK EP 61 For surfaces: metals plastics composites ceramics / glass wood Application: filling losses in wood - as a putty for wood filling small defects in concrete - concrete floor gluing furniture edges Characteristic features of the adhesive 021 (bucket) does not contain solvents does not damage the glued surfaces hard-elastic connection (you can glue different materials together) gluing, pouring and filling Mixing ratio: 5: 1 Time for application: 30 minutes Sanding after: 8- 10 hours Form: paste Color: beige Weight: 1 kg Characteristics of the 021 adhesive (cartridge) does not contain solvents does not damage the glued surfaces tough-elastic connection (different materials can be glued together) gluing, pouring and filling Mixing ratio: 1: 1 Time for application: 10-12 minutes Sanding after: 3 hours Appearance: paste Color: black Weight: 400 ml In stock later purchase options: ATK PU021 adhesive (thick) op. 1kg Adhesive ATK PU021 (dense) 400ml cartridge+ Squeezer 1: 1 400ml (promotion)+ 3 pcs. the stirrers (08-24)