Adhesive for MDF strips - ATK FIX 01

Adhesive for MDF boards and strips - ATK FIX 01 Cyanoacrylate ATK FIX adhesive of medium density, effective in gluing MDF and wood-based materials. If you have absorbent surfaces, use the thicker product ATK FIX 54. What can we glue?: MDF strips PVC edges for mdf boards, furniture edges made of ABS and other materials - also rubber and similar. pvc, rigid and flexible wooden strips among themselves. Due to the wide range of applications, it is also suitable for gluing: rubber, plastics, metals, ceramics, etc. The adhesive is suitable for butt gluing the above materials together. If you will glue linearly or aluminum strips, choose ATK 812.For large surfaces glued over the entire surface, we recommend ATK PU 021 Profiles, Corners, Chipboards, User manual: degrease two surfaces for one, spray activator C - accelerator, and wait a moment, apply glue on the other and press 3-5 seconds - done. Properties: Color: transparent Viscosity: 60 ... 80 [mPa s] Density: 1.06 [g / cm³] (20ºC) Max. Filling gap: 0.05mm Flash point (ISO2592)> 81 [ºC] Dielectric strength: 25 [kV mm] Tensile strength: 90 N / cm2 The MDF bonding kit includes: Cyanoacrylate ATK FIX 01 adhesive - 50 g Activator C spray - 200 ml. Isopropanol-based degreaser - 100 ml. NOTE: In order to preserve the properties of the adhesive in the long term, it should be stored in a refrigerator or a freezer. TIP: Dry brick, concrete and silicate walls with a brush so that no loose elements and dust are left. If you have a problem with it, prime it at the gluing points so that the surface is consistent (for raw bricks or blocks, even 2-3 times)