Adhesive for glass and metal, thick ATK UV35

Set with ATK UV35 thick glass and metal adhesive for inclined and vertical surfaces. The adhesive forces are so great that the glass tears or breaks when tested. The dense version has the ability to fill gaps up to 2 mm, it will be useful wherever metal surfaces do not fully touch each other. If you have gaps over 1-2 mm. use ATK 812 or ATK PU 16 The exposure time depends on the thickness of the glue and glass transplantation (standard with a 2W flashlight it is 20-40 seconds. If you want to cure within 5 seconds, replace with a surcharge for a 3W or 5W flashlight. Recommended glue is ATK UV35 due to increased resistance to moisture and water The set includes: 1. UV adhesive for glass with metal ATK UV # 35 - 50 ml (thick) 2. Degreaser based on isopropylene 100 ml 3. 2W torch