Glass and crystal adhesive ATK UV23

Glass and crystal adhesive ATK UV23 A rare form of only 100 cps allows it to flow between surfaces at cracks and pre-connected elements. Bonding materials such as: glass, crystals, metals such as aluminum, steel, etc., wood, plywood Specifications: perfectly transparent, viscosity: 100 cPs, (thin-pouring) gap 0.03 - 0.2 mm strength: 10-14 N / mm temp work: -55 -+120 degrees curing: UV light resistance to weather conditions and chemicals Included: 1. UV glue for glass with ATK UV23 glass - 50 ml 2. Degreaser based on isopropylene 100 ml 3. 2W flashlight for batteries Important information: - the gap with this version is max 0.2 mm, if you have larger gaps, choose the denser ATK UV 20 version - the flash is perfectly transparent, but stays sticky, so after curing it is enough to wipe with the degreaser from the set - the exposure time depends on the thickness of the glue and glass permeability (standard with a 2W flashlight it is 20-40 seconds) - if you want to cure within 5 seconds, replace with a surcharge for a 3W or 5W UV flashlight.