Description
Dictionaries
Comments
Gluing foams and sponges - assembly, upholstery U800 glue withstands temperatures up to 180 degrees, so it can be used in standard elements and those working at elevated temperatures, especially heating up cyclically or continuously. Do you need a large pack of glue? - click here. We glue: upholstery foams upholstery sponges polyurethane foams acoustic foams foams soundproofing coconut mats other materials for upholstery hard and flexible above to each other and with: fabric, metal, wood, plywood, shavings, etc. ATK 822 primer or buy the whole set with a wall - internal building materials such as brick, plaster, concrete, panels Application of the products: 1. Glued elements should be clean and dry; if you stick to metal or plastic surfaces - degrease the surface, 2. Apply evenly with a brush , trowel or spray glue on two surfaces and wait about 5 minutes for drying, 3. Press down on the whole, and if the material is springy, leave it under pressure or stretched for at least 30-60 minutes. - larger than 1 liter under the order Note: - Remember about earlier tests, if you do not know the origin of the sponge - loose and loose surfaces should be cleaned, e.g. with a brush and, if necessary, primed - with highly absorbent foams or modified polyvinyl chloride (PVC) foams, it may be necessary to cover the surface twice, - the glue can be applied as a spray after pouring into the pressure tank and using the 1.6-1.8 nozzle - all comments and descriptions which we cite above refer to a professional, industrial and repeatable process that is performed under production conditions and the glued elements are tested to conditions that are many times higher than normal use, especially over the years. A large part of the current contact type adhesives such as U-800 do not pass the tests " aging "- that is, they are holding now, and after 2-3 years the glue crumbles and the joints peel off.
Comments