Hot melt adhesive ATK 113 - 1kg

Adhesive for foam with other plastics ATK 113 ATK 113 hot-melt adhesive is intended for gluing various types of foams with each other and for wood, metals, concrete where fast gluing is needed and there is no high temperature. We recommend the use of a hot melt glue squeezer due to the high efficiency and the possibility of temperature regulation, which is important when selecting the gluing speed and increasing the strength on some substrates. Glues PU / PUR polyurethane foams, polypropylene foams and even PE polyethylene foams. in sticks with a total weight of 1 kg. Form: 11 mm stick / stick. (standard diameter), 30 cm long. Color: Milky Good to know: 1. If your squeezer has a temperature regulation, by increasing the gluing time by 30s -1 min, the glue will become more flowing and will stick to the surface better - at the same time remember that high temperature may adversely affect the glued material - e.g. deformation of some foams. 2. Remember that concrete and metal surfaces cool down the glue faster, 3. Never cool the glue with water or air, 4. Remember that the surface should be clean, dry and rubbed with sandpaper, if possible - increase the bonding surface, 5. If gluing rubbers, it is necessary to perform earlier tests due to the multitude of types, 6. If you are gluing large surfaces, use U-800 contact adhesive.