Leather, felt and cork adhesive U-800

Adhesive for leather, fabrics and synthetic materials U-800 About the adhesive: A very good contact adhesive characterized by high efficiency and ease of use. It gives the possibility of creating flexible and durable connections. A characteristic feature of the adhesive is high temperature and thermal resistance. U-800 adhesive is suitable for joints exposed to high stress. High initial holding force after pressing. Features: Temperature resistance: from -25 ° C to approx. 180 ° C, from -25 ° C to 95 ° C (under high stress), Resistant to aging of the weld, Low consumption: approx. 100 g / m², Open time up to approx. 15 minutes, Working temperature: minimum 15 ° C, Color: colorless with a glow of green, Packaging: 200 ml (larger packages available on request - 1 liter, 5 liters, 30 liters) Glue: natural leather ecological leather - eco leather elastic leather cork natural felt and artificial fabrics natural and synthetic coconut mats upholstery materials for each other and with each other and materials: rubber metals wood other after previous tests Instructions: clean the surface, degrease and dust it, apply glue evenly to the entire surface and wait 3-5 minutes. (you apply it on two surfaces) press down with your hand, with a spatula or use a pressure roller in the case of stretching the leather / fabric, use fixings until the glue dries. Remember: in special cases, it may be necessary to apply twice to the surface with heavily modified eco-leathers, if you want to glue to PP, TP, etc., use the ATK 822 primer, if you will knock on polyethylene foam, use the ATK 823 primer Note: For artificial leathers, tests must be performed. The product is also not suitable for polystyrene and styrodur surfaces. The glue can be applied as a spray after pouring it into the pressure tank and using the 1.6-1.8 nozzle