U-800 car roof lining adhesive

U-800 glue for gluing car soffits. U-800 glue is an industrial glue used in the automotive industry by specialized companies for gluing car soffits, upholstery materials and soundproofing foams. Application can be by brush, roller or spray application; that's why we can stick the tear-off roof lining without removing and tearing off the entire surface. It is currently the highest version of this type of adhesive, which can withstand temperatures up to 180 degrees and high resistance to aging. It is a product modified with natural and synthetic materials with a mixture of SBS, SR and PU rubbers with an organic solvent, which is why it gives such good results also in places where other adhesives do not work. The bonding surface is very flexible and does not crack with time We use in places such as: car foams for interior and exterior soundproofing, fabric door upholstery, leather and eco-leather, alcantara, etc. foam, felt and cork soundproofing polyurethane foams in seats and armchairs the above materials with each other and with plastics, metals, wood, in the case of heavily modified eco-leathers with a polyolefin layer, use a double layer of adhesive or ATK 822 primer also on leather surfaces. Application: 1. When gluing the soffit to raw or varnished metal, degrease the surfaces with the degreaser provided, 2. Apply the glue on two surfaces and wait approx. 5 minutes. until dry, 3. Press on the entire surface and it's ready, 4. The adhesive is pre-held immediately, and fully cured after 24 hours. What can we glue? soffit with foam soffit with metal soffit with plastic - if it is plastic PP, PP / EPDM PP+ T ... use ATK 822 primer or buy a whole set gluing car upholstery foam and felt soundproofing mats in the car - gluing to the car body soundproofing the engine flap - material-foam and material-rubber soffits Included: ATK U-800 soffit adhesive - 200 ml Degreaser based on isopropanol 100 ml Specifications: Base: polymer modified rubber Viscosity: approx. 230-270 cPs. Average consumption: 100g / m2 Temperature range -20 to 180 degrees Color: green glow Package: 200 ml, (other available on request: 1 liter, 5 liters, 30 liters) Additional information: If you only have pieces of detached soffit, you can pour glue into the syringe and inject under the soffit (if it is not the very thin material itself) and leave it under the pressure until it hardens.