Adhesive for aluminum tanks AL21

Version of the so-called KEMISKIT AL21 liquid metal, i.e. aluminum glue in a thick paste form for the repair of aluminum surfaces. Repair in any position - the product does not run down. We use for: - wiping the tanks - holes and other openings, small and large (in the case of holes larger than 1-2 cm, it is worth sticking a piece of the plate so that the glue does not squeeze into the tank when applied - unless we have access from two sides) . scratches, dents, etc. - sticking aluminum tanks / tanks The adhesive is resistant to gasoline, oils, greases etc. If you have a steel tank, use the FE21 version By weight Mixing ratio: 7A: 1B Mix ratio by volume: 4A: 1B Shear strength N / mm2 : 17-18 Open time: 30 minutes Curing time at 20 ° C: 24h / 20 ° C / 80 min / 80 ° C Continuous temperature resistance: - 40 ° C ≤+ 200 ° C Mixture viscosity (mPas): Thixotropic paste Appearance / color: aluminum Included: KEMISKIT AL21 30ml / 50g paste Isopropanol-based degreaser 250 ml Mixing kit: Plastic pad, 4 application sticks, Spatula Flexible mesh 01