Adhesive for car moldings ATK 812

Adhesive for exterior car moldings ATK 812 Use glue instead of the tape, which usually holds until you go to the car wash. Glue the entire side moldings in cars or from broken catches. There may also be torn pieces. The glue is effective and more durable than the traditional double-sided tapes used, which simply fall off when exposed to moisture, frost or high temperature. plastic side strips aluminum side strips, galvanized, etc. lintel covers, anti-slip treads, bumpers, covers, plugs, stamps, emblems Instruction: remove the old tape or glue, sand the side strip slightly degrease 2 surfaces on the strip, apply ATK 822 or 8154 primer and wait 20 min. apply the glue so that after pressing the thickness is 2-3 cm, leave it under the clamp, fixing it with e.g. paper tape until it is fully dry. It is: 100% waterproof glue, fast setting, good adhesion, high strength, resistant to water, UV and chemical compounds, in black, Packaging 400 g The whole set includes: 1. ATK 812 400 g adhesive - black 2. Degreaser for surface cleaning - 100 ml3. Adhesive primer ATK 822 - 500 ml spray