White laminate adhesive SA 10-15 WHT

Methacrylate adhesive for Acralock SA 10-15 WHT laminate - white Perfectly white version for gluing, filling and sealing in visible places, where we want to obtain an aesthetic connection. After applying, the flash is formed as a joint, which immediately seals it. The surfaces after gluing, if necessary, can be painted. We use for: white laminates, gelcoats, topcoats, other top layers in white (painted, dyed in mass, etc.). Joining with each other and sealing also with materials: raw and painted metals (aluminum, steel, stainless steel, etc.), plastics such as PS , HIPS, ABS, PVC etc. epoxy and polyester composites etc. with fibers and fillers acrylics, polyesters, vinylesters, gelcoats, Advantages: styrene-free filling of gaps up to 15 mm (min.0.5 mm) initial strength 1 h (60 %), full 6 hours resistant to UV light, therefore durability. temperature from -40 to 120 ° C short-term up to 200 ° C working time 15-17 min. (40-minute version available on request) joining raw and coated metals without the use of primers, primers, etc. full resistance to weather conditions, salts, bases (pH 3-10) and non-concentrated acids resistant to vibrations, impacts and vibrations which partially reduces, depending on the thickness of the glue, elongation up to 140% - a hard-elastic connection, therefore you can glue metal with plastic / composite on large and small surfaces without damaging both materials when temperature changes. U-800 glue When you buy the product in the set you get: Glue for laminates and gelcoats Acralock SA 10-15 WHT - 490ml. Mixers / Glue mixer - 3 pieces Alcohol-based degreaser - 100 ml Squeezer for adhesives in the 10: 1 system - 490 ml. IMPORTANT ADVICE When bonding composites with a laminate: epoxy, polyester, melamine, PS, ES, FRP, CFRP, GFRP, AFRP, BFRP reinforced with glass, carbon, Kevlar and other fibers and textolite with each other and metals, stainless steel, aluminum and plastics in structures We use boats, cabins, railways and santwich spacers: - for small and medium-sized surfaces SA 1 or SA 10-15 BLK - for large and very large surfaces SA 10-70 - gluing and sealing of gelcoats, topcoats etc. with snow color white SA 10-15 WHT - for highly flexible surfaces GB 10-10 - boat sealant - ATK 812 yacht, even under water - gluing wood-plywood elements with metals, plastics and composites ATK EP61 Our advice in word, writing and through experience, are the results of our best knowledge, but only non-binding guidelines are relevant, also with regard to any third party property rights, and do not exempt you from own samples of the products we provide, in terms of their suitability for specific technologies and purposes. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery.