Description
Dictionaries
Comments
An adhesive for joining aluminum with itself and other materials. Especially recommended for longer and larger elements than with EP61, i.e. gluing aluminum strips, angles, sheets to supports, especially in the case of low-quality aluminum alloys of unknown origin. If you have a cavity or crack, take liquid metal AL21. Structural bonding of aluminum with forces up to 33 N / mm2, which causes the glued element to be damaged even when bent / broken. If you will be powder coating after gluing, the recommended version is Acralock SA 1-15, although this version also withstands this process. Designed for materials: raw aluminum, anodized and powder coated steel raw and painted by gluing galvanized metal, high-gloss stainless steel choose Acralock SA 1-15 for gluing copper or brass choose MED21 or EP61 plastics after olefins glass and carbon fiber composites surfaces gelcoats, laminates, etc. Making the connection: clean the surfaces with the degreaser included in the kit, roughen the surfaces, if possible, rub with AP1 etchant and wait 15 minutes. apply glue so that the pressed layer is between 0.3 and 10mm. leave to set The complete set includes: 1. Aluminum glue Acralock 10-15 BLK- 50 ml 2. Degreaser based on isopropanol 100 ml 3. Metal AP1 degreaser - 5 ml 4. Stirrers / mixers - 3 pieces 5. Cartridge squeezer 10: 1 - 50 ml. Our advice, in words, in writing and through experience, is the best of our knowledge, but only non-binding guidelines are relevant, also with regard to any third party property rights, and does not exempt you from your own trials of the products we supply with regard to their suitability for certain technology and goals. We ensure, of course, the absolute quality of our products according to the general terms of sale and delivery.
Comments