Dispensers for adhesives and pastes

There are liquid dispensers and dosing robots for industrial applications - continuous feeding of glue and other liquids, even in doses as small as 0.01 ml. The dispensers have a modular design, so changing the dispenser from 50 ml packages to 10 liter tanks is not a problem. At the beginning, all you need is data: what portion and how much of the product is to be applied per day. This will allow you to choose the size of tubes or buckets. We have 3 basic types: tubes from 5 ml to 300 ml, which we get from the manufacturer or most often we fill ourselves from a pressure tank from 3 to 20l. Such non-filling "comes out" cheaper than buying the originals. 310 ml silicone tubes, 600 ml of mass in the intestines or 50 ml two-component cartridges. - can be applied directly or 0.1 ml each. There is also an option to translate into 5 or 10 ml industrial syringes and separate them into individual stations. dosing large amounts of products daily glues and resins - then the product is taken from a pressure tank of 3, 10 or 20 liters and applied with the head. For one-component fluids, the standard head is J-120 and for two-component fluids OZ-620. After finishing work, you do not need to clean it, because it is enough to remove the mixing mixer and then insert a new one. In the case of a production line with a very large number of elements, a dosing robot comes into use. We are already talking about automating the entire process. Only trays with elements for putting on and taking off are left to be inserted, and in the most extensive option - the conveyor itself will be placed on the drying field. For the selection and design of such a machine, please contact us, because there are a large number of variables that must be taken into account. Glue feeders of this type are mainly used in serial production, where accuracy, repeatability and speed of application are important. If you are looking for a hot glue applicator, enter this category.