Dispensing needles and tubes

In this category, you will find dosing needles and industrial syringes for filling them, as well as special adapters that allow them to be mounted to various packages without a luer-lock exit. Below you will find information on where and what products the dispensers use for the most popular works. Types of syringes: Empty dosing syringes for self-filling, come in various sizes, i.e. 5 ml. 10 ml. 30 ml. 50 ml. 100, 200 and 300 ml. made of PP with transparent body. For 5-55 ml. volumes are also available special bodies with a blockade of UV light (amber) or black with complete cut-off also visible light, especially for sensitive UV adhesives. The most common products in this type of packaging are soldering pastes and soldering fluxes, etchants and removers as well as single-component adhesives, silicones and masses. If you want to fill them yourself, please contact us and we will select the appropriate dispenser. in the right proportions. Standards are 1: 1, 2: 1, 4: 1 and 10: 1 with sizes in total from 37 to 490 ml. Dispensing needles are another type of product you'll find on the site. Due to the different substances and their viscosities and densities, we have a choice of about 8 types. Metal dispensing needle with a plastic body - the most popular and most frequently used, it is suitable for various thick and liquid products, we do not use for e.g. anaerobic adhesives. all metal needles - we use in highly aggressive products and when the needle itself is more durable than the standard needle, the conical needle - made entirely of PP plastic - despite the same exit holes has less resistance, therefore it is suitable for dense pastes and glues flexible needles with standard construction made entirely of plastic, we often use for robots, because in case of problems it will not destroy the material and, alternatively, for metal needles, needles with a Teflon tip - it has been specially designed for aggressive and volatile products where other exits become clogged, e.g. cyanoacrylate adhesives needles with a brush - Here you should choose the size of the brush itself and the internal diameter from which the liquid is fed, they can be flat and round with flexible or stiffer bristles. If you do not have a luer-lock outlet on the package, an adapter with a thread that you screw through the outlet or ends for silicone cartridges will be helpful.