Welder for plastic AT-4000

Angle-pistol welder for plastic with a construction like a heat gun for the convenience of use. The model is designed for low-intensity work and its high versatility of use allows you to weld various types of materials. Precise temperature control and digital display ensure perfect selection for the type of welded surface. Good performance, ergonomic and, above all, durable and solidly made tool. The comfortable pistol shape of the heat gun does not tire your hands and significantly increases the comfort of work and allows you to reach hard-to-reach places. The set includes a set of the most popular binder markings so that you can start welding immediately. If you are welding services, choose the AT951 model or the professional Bosite-PID version. Don't forget to buy a plastic stapler, which facilitates and speeds up the work of even thin elements such as lamp holders. What we use for: welding plastic of small and medium thickness, e.g. typically automotive, household appliances, RTV heating the surface before work - especially at low temperatures welding tarpaulins, banners, insulating foils, etc. - after buying a flat nozzle and a pressure roller - a set Welding Plastic with This device is simple - a short package of tips: recognize the plastic of which the welding element is made, e.g. ABS, PP, PC, etc. mill the crack, sand the sides of the crack, set the temperature to the given binder so that it slightly melts, put the binder and wait until it cools down roll over the excess and it's ready Specifications: power 2000 W • voltage 230v • temperature display • temperature from 50 to 630 ° C • easy and quick adjustment of the device temperature - 1st gear - cooling the device - 2nd gear - Adjustment every 10 ° C - 3rd gear - maximum blow-off with temperature control • blow-out regulation (5 steps) • Japanese MABUCHI engine • 2 m cable The set includes with: AT4000 plastic welder A set of starter binders 1 kg (10 types of plastics: 9 mm nozzle+ quick-welding shoe) Remember: set the temperature and blow-out to the material and wait until the whole warms up 30s - 1min. clean the air inlets regularly and do not leave them on a dirty and dusty surface if there is too much smoke during welding, reduce the temperature or move the nozzle faster