Tape for car moldings

Strong double-sided automotive tape for side skirts and other automotive elements. Use wherever you need to quickly, easily and aesthetically stick different materials together. Resistant to weather conditions and road salt. Application: chrome-plated strips emblems - also made of chrome-plated plastic or metal Instructions: remove the old tape or glue, sand the side strip lightly with sandpaper, degrease 2 surfaces, if the strip is not made of raw plastic, then apply the ATK 822 primer and wait 20 minutes. (in the case of chrome and metal it is not necessary) apply the glue so that after pressing the thickness is min. Leave 2-3 mm under the pressure, fixing e.g. with paper tape until fully dry. Remember: always glue on a clean surface above 15 degrees, if it is less - heat the glued elements while applying, do not stretch the tape Technical data: Type: double-sided Type of adhesive: Acrylic Width: 9 mm Density: 600 kg / m³ Thickness: 1.1 mm Short-term temperature resistance: 120 ° C Long-term temperature resistance: 90 ° C