Plastic primer spray 500ml ATK 822

Plastic spray primer ATK 822 Primer with a directional nozzle for even, splash-free application to increase adhesion on plastics, especially for PUR, PP and derivatives for adhesives and varnishes. We use for products based on: polyurethane based adhesives (e.g. ATK PU 16, 021 and clear) epoxy (ATK EP) polymers (ATK 812) varnishes (on all bases) paints (regardless of the paint base) - primer / primer for UV paints and varnishes It is indispensable as an adhesive for joining materials such as: PP PP / EPDM PP+ T 10; T20; T30l T40; TD+ PP+ M20, PP+ M15 SMC PC, PA ABS rubber-like materials: TPO, TPE, FPO, TEE, FPO PUR PU and also after previous tests of EPDM rubbers, metals, wood and composites not recommended for pure PE, PVC, POM and Teflon, in the case of PE polyethylene, use ATK 823 Application, among others, for: gluing and varnishing bumpers, side strips, roofs and bonnets made of aluminum or carbon - composite, tuning elements such as spolilers, ailerons, air inlets, grills, industrial elements of purliners, mats, grilles composite surfaces before painting FPO roof membrane elements Packaging: 500 ml Form: Spray Instructions - degrease the surface with IPA degreaser do not use gasoline, solvents and removers - apply ATK 822 primer evenly on the surface and wait 5-10 minutes. for evaporation - in the case of absorbent, porous and uneven materials, apply 2-3 layers in 5 minutes. intervals (if you want to shorten this time, you can heat up the entire element after 30s-1min. from application (do not dry it immediately, activator 822 must work on the surface) - proceed to the next steps, such as gluing or varnishing.