Hot glue for PP and PE - ATK 113

Hot glue, mainly for PP, polypropylene and PE, PEHD and PELD polyethylene, in places that do not require high forces. Form: staff / stick 11mm. (standard diameter), 30 cm long. Color: milky Working temperature: 160 and 210 degrees. Packaging: 1 kg. Instructions for use: grease the surface with sandpaper to roughen the grease, reapply glue and press, leave to cool. Recommended is a hot melt gun with temperature control, eg model GLUETEC 3350. Good to know: The subject of the so-called plastics. hard-to-glue ones are complex, but below is a list of what you should choose if you have elements made of these plastics. - general pp, pe, pom, ptfe bonding butt and overlapping or at cracks by bonding the PP 1-02 reinforcement, e.g. a cracked plastic barrel - bonding small elements ATK FIX with a primer - bonding pp, pe, pom and ptfe - bonding polyethylene foams - U-800i 812 with ATK823 primer or warm ATK113 - gluing lamps and bumpers with pp, pp / epdm, pp+ .... pu16 with 822 lining - bonding and sealing surfaces with pp ATK 812+ 822, pe ATK 812+ 823 ( or see point 1) - all types of PE foil - insulation, geomembranes, roofing membranes use HYLKOL