Gluing additives

Mesh for reinforcement when bonding metals with the products AL21, FE21, MED21 and Kemis A21. It strengthens the entire bonding and allows you to easily obtain a minimum adhesive thickness of approx. 2-3 mm. A double layer can also be used.

The only primer for polyethylene PE (HDPE HDPE) for MS, polyurethane and contact adhesives, type U800. Increases adhesion to the surface several times.

Degreaser for plastic and other materials before gluing, painting and varnishing. It is not aggressive for most surfaces, however, in the case of styrene plastics, spray it on a cloth and degrease it or perform a test in advance.

A specialist plastic primer in an easy-to-apply spray. For industrial elements and bumpers made of polypropylene, PP, PUR, polyurethane, TPO, TPE, FPO and others. It increases the adhesion of adhesives, varnishes and paints, activating the surface.

Metal backing.

A full face mask with goggles to protect the respiratory tract and eyes even with the smallest particles and vapors in varnishing, powder and spray painting, gluing and welding.

Mesh for reinforcement when bonding plastic to be embedded with ATK PU 16 and 021 adhesives. In special cases used for reinforcements with Kemispox N / AL21 / FE21 and EP 351 adhesives. For straight surfaces it can be replaced with metal mesh.

A special primer for silicone, rubbers with silicone additives and rubbers.