PVC pipe adhesive 1L - ATK

Adhesive for PVC, PVC-U, PVC-C ATK PVC pipes is used for gluing PVC pipes in gardening, civil engineering, water and sewage construction, etc. It is perfect for gluing pressure and non-pressure pipes, also in drinking water installations. It is a solvent-based, aggressive adhesive. What can we glue? sewage pipes (muffs, elbows, couplings, etc.) central vacuum cleaner pipes pressure water pipes and ordinary gutters PVC plastic ABS / PS / PMMA / PC pvc pipes foamed and hard If you want to repair a leaking or broken pvc pipe, use a half-pipe and a dedicated Acralock SA 1-15 NAT glue. The most important advantages of PVC pipe glue: • fills gaps up to 0.5 mm • designed for all pipe diameters • intended for gluing PVC-U, PVC-C and ABS materials • resistant to sewage, agricultural fluids and other chemicals • suitable for gluing both drinking water installations, as well as (high) pressure and drainage pipes Operating instructions for ATK PVC glue: degrease 2 surfaces if heavily soiled element can be sanded lightly apply glue to one surface and press the coupler in case of gaps over 0.2 mm apply glue for two surfaces (such a gap means that you can easily twist the connector), leave it to dry completely; drying time when gluing pipes depends on the amount of glue, but the initial strength is obtained after several minutes. The adhesive pack is 1 liter of product. After unscrewing the glue, you will find an integrated brush for spreading the glue. Technical data: 1. Base: PVC polymer 2. Viscosity (EN 12092): ≈ 1300 mPa.s 3. Density (DIN 51757): ≈ 0.94 g / ml 4. Solids content: ≈ 26% 5. Open time: ≈ 3 minutes 6. Application temperature: Above+ 5 ° C 7. Temperature resistance up to: ≈+ 60 ° C (short term up to ≈+95 ºC) 8. Drying time: 24-48 hours. Depending on the thickness of the glue, see the technical sheet in the appendix. Any more questions? Contact us by phone or e-mail.