Perfectly transparent flexible adhesive and ATK 811 sealant for a wide range of materials Good to know: The black, white and gray versions are definitely stronger versions. So if the color of the glue is not important to you, choose the ATK 812 version. Specifications: tear strength 1.8-2 Mpa / cm2 color: colorless packaging: 290ml tube. resistance to weather conditions high resistance to yellowing without solvents (does not damage the surface, does not react) does not react with the surface odor: no curing speed 2mm / 24h temperature resistance: - 30+80 glues: glass ceramics stone concrete wood polystyrene plasterboards other construction materials metals aluminum (ATK P200 required) plastics (with ATK 822 also PP polypropylene) powder coated elements should be tested with ATK P200 primer How to use: degrease the surface, roughen the surface, e.g. with sandpaper and degrease again using ATK primer P200 for most materials increases adhesion to the surface, it is enough to apply for 20-30 minutes. apply the glue beforehand with lines every 3-5 cm so that when pressed, the glue does not knock against each other - it will speed up the binding speed
Comments