Mounting adhesives

Mounting adhesives for the group of adhesives for finishing works in construction and typically general construction. We also use them for industrial repairs and maintenance in industrial companies. Of course, we can use them at home, and their selection is very easy, because the basic adhesives are ATK 812, combining flexibility and ease of application, replacing all single-component products on the market with lower strength, such as silicones or soft polyurethanes, ensuring the absence of solvents and neutrality to the surface . Wherever you used to use sanitary silicone, which after 1-2 years went away like fixing washbasins, sealing shower cubicles and joints with tiles, sticking fixings, finishing strips and fixing various decorations regardless of the wall surface. Now you can do it harder and with a permanent joint. The second version is ATK PU021 - a two-component adhesive for manual mixing, used for gluing metal sheets, plasterboards and wooden, kitchen worktops to concrete stairs - stone and wooden - on the entire surface. The whole thing immediately seals and prevents the ingress of water, so we can use it as an impregnation for e.g. worktop edges. We use PU16 in small and medium-sized elements. Use it for metals, plastics and even modified substrates with a quick setting, because after about 15-20 minutes we have greater strength than standard adhesives available on the market. In the case of surfaces where we want to obtain a "nice" joint, we recommend ATK PU CLEAR, with forces up to 80 kg / cm2, while other transparent adhesives are only 10-20 kg.